9602 SBD Modem

$852.28 USD

Beam 9602SBD Data Modem is a robust data terminal specifically designed to incorporate the Iridium 9602 SBD module with an inbuilt 9-32V DC power supply. It is currently the smallest SBD Modem product on the market. The terminal connector supports power input, USB & serial data to be used on the modem. The robust enclosure enables the terminal to be used in a wide range of applications.

SKU: SBD9602 Category:


RF Characteristics
Multiplexing Method TDMA / FDMA
Input/Output Impedance 50 Ohms – SMA F Connector
Oscillator Stability ±1.5ppm
Frequency Range 1616MHz to 1626.5MHz
Receiver Spurious Rejection at offsets > 1 MHz (typical) 60 dB
Standby Power 0.225W
Average Power 0.95 W (During message transfer)
Receiver Sensitivity -117 dBm at 50 Ohms (typical)
Peak Power 7.5W (max)
Environmental Specifications
Dimensions 90 x 59 x 25mm
Weight 0.25 kg
Operate Temp. Range -40°C to +85°C ambient
Operating Humidity Range <75% RH
Storage Temperature -40°C to +85°C
Power Consumption
EMC Compliance CE
Speed 2400 bps
Modem Type SBD Data only
Transmit Mode Peak 125mA (1.5W at 12V in)
Idle Average (measured over 5 min with one full message Tx/Rx every minute) 30mA (0.36W at 12V in)
Plug-pack (if provided) 100-240VAC 50/60Hz input
Power 9 – 32 VDC, 1A
Physical Specifications
Outer Box Dimensions 145 W x 150 D x 55 H
5.71 W x 5.91 D x 2.16 H
Box Weight 0.576 kg 1.27 lbs



There are no reviews yet.

Be the first to review “9602 SBD Modem”

Your email address will not be published. Required fields are marked *